MASH P16L – 385nm High-Precision 16K Professional Dental 3D Printer


14 μm Precision | 250 Crowns in 25 Minutes

More than just a 3D printer, MASH P16L is your digital production partner—designed to keep your laboratory running and deliver confidence even in the most complex cases.


💡 385 nm UV light technology – Maximum surface quality without compromising speed

🎯 14 × 19 μm XY precision

✅ 250-unit crown production in just 25 minutes

🔧 8-point vertical calibration – Stable production for months without frequent adjustments

🌐 Open resin system – The freedom to work with resins from different brands


🗣️ “We want precision work to fit perfectly every time and our models to come out exactly as they were digitally designed.”


You’re not the first to say this. During the development of MASH P16L for dental workflows, we focused on the same recurring challenges experienced by hundreds of dental technicians:


🔄 RPT caused by poor fit,

📉 Reduced surface quality caused by Z-axis instability,

💸 Dimensional accuracy sacrificed for speed,

⌛ Hours lost searching for technical support,


MASH P16L was designed to break this cycle and take the risk out of digital production.


It delivers more than speed and precision—it brings consistent micron-level accuracy to every print, giving you what matters most: confidence.

Image


Standout Features 🚀


💡 385 nm UV Technology: Optimized wavelength for dental resins, delivering sharp margin lines and excellent restoration fit.


🎯 16K Monochrome LCD: Bring your digital designs to life with 16K resolution and 14 μm precision.


⏱️ Maximum Productivity: Print up to 250 crown units in a single run and significantly increase your laboratory’s production capacity.


🔧 8-Point Vertical Calibration: Set it once and maintain stable, consistent precision for months with the dedicated vertical locking mechanism.


🏗️ Hiwin Mechanical Precision: Equipped with globally recognized Hiwin linear rails and a ball screw system for smooth surfaces with minimized layer lines.


📐 Dual Build Platform Flexibility: Switch between Large-Area and Fast-Print build platforms in seconds, depending on your case volume and production needs.


🔓 Open-System Freedom: Use the resin of your choice without brand restrictions, with full compatibility with popular slicing software such as Chitubox.

Image


3MASH Engineering Excellence & Uninterrupted Technical Support


🎓 Expert Calibration: MASH P16L is specially optimized and calibrated by 3MASH engineers to meet the dimensional accuracy requirements of dental production.


🛠️ Fast, Direct Technical Support: For any technical needs related to your device, our experienced team provides fast and direct support, helping you keep your production running smoothly.


📦 Immediate Spare Parts Availability: With 3MASH stock support, essential consumables and spare parts—including LCD screens, FEP films, and mechanical components—are readily available when you need them.


🤝 Industry Expertise: When you choose MASH P16L, you gain more than advanced technology—you benefit from 3MASH’s extensive experience in digital dentistry and its role in advancing digital dental production in Türkiye.

Image


Precision 8-Point Calibration, Stable Production for Months 🔧


🧿 “Automatic calibration” sounds great, doesn’t it? But expecting a professional system operating at 14 μm precision to recalibrate itself perfectly for every print—especially in a high-volume dental laboratory—is not always realistic.


💬 We encourage you to speak with colleagues who use printers with automatic calibration. Ask about their long-term experience with software-based compensation and whether they have encountered dimensional deviations over time. Real user experience speaks for itself.


🔧 At 3MASH, we believe precision requires a robust mechanical solution. MASH P16L is built with industrial-grade Hiwin linear rails and a ball-screw system, designed to minimize even the slightest Z-axis movement.


🛠️ The 8-point vertical calibration system, optimized by 3MASH, requires precise adjustment during setup. Once mechanically locked into position, the system is designed to remain highly stable.


📅 Under proper operating conditions, recalibration may not be required for months.

Image


Open System, Smart Resin Management 🌐


🔓 MASH P16L is an open-system 3D printer. Fully compatible with popular slicing software such as Chitubox, it gives you the freedom to build a flexible dental production workflow.


🧪 Maximum Performance with Our Resins: The system is optimized for the chemical characteristics of our MASH and CRS dental resins, helping you achieve consistent micron-level accuracy from bottle to bottle with 3MASH quality assurance.


🌡️ Thermal Stability (Heating System): Resin temperature is just as important as resin quality. P16L’s integrated heating system automatically maintains the resin at 25°C or 30°C, ensuring consistent viscosity and reliable printing even during winter or in cooler laboratory environments.


💧 Uninterrupted Workflow: With a 800 ml automatic resin feeding system and level sensor, you can focus on production without worrying about running out of resin during high-volume prints.


🌟 “A 3D printer and resin deliver reliable results only when they work together.” Our experience has shown that inconsistent or low-quality resins can compromise the performance of even the most advanced printer. MASH P16L is designed to maintain this critical balance.

Image


Which Dental Applications Can It Be Used For? 🦷


With its professional 385 nm UV technology and 16K ultra-high resolution, MASH P16L delivers exceptional dimensional consistency across demanding digital dental applications. Its wide range of applications enhances laboratory flexibility while maintaining high detail accuracy and reliable restoration fit.


🦷 Temporary & Permanent Restorations: Smooth, highly detailed surfaces with 16K resolution.


🦷 Precision Die Models: Sharp margins and accurate die fit.


🦷 Implant Models: Micron-level accuracy for stable analog positioning.


🦷 Night Guards & Splints: High-transparency, biocompatible solutions.


🦷 Aesthetic Mock-ups & Wax-ups: Precise physical reproduction of digital designs.


🦷 Orthodontic Models: High-volume production in a single print with the large build platform.


🦷 Digital Denture Workflows: Fast and reliable production of removable dentures.


🎯 Prints for every application. Consistent precision, every time.

Image



FAQ

What is the biggest advantage of MASH P16L in dental production?
How often should the printer be calibrated?
Can it be used with dental resins from other brands?
Why is the smart heating system important?
How does the technical support and spare parts process work?
Is the printer difficult to install and use?